COMPLIANCE INSPECTION SERVICES, INC. 1032 Lee Road, Amelia La. 70340


Compliance Inspection Services

Our 16 Ft. steel Workstation is design for multiple uses offshore and on land projects. Our structural frames are DNV 2.7.1 certified and Lloyds approved for Class I & II zones.

Compliance Inspection Services

CISI developed and manufactured pontoons style oil skimmers were on the front line in the Gulf of Mexico during the Gulf Oil spill of 2010

Compliance Inspection Services

We supply an exhaustive variety of specialty coatings which offer the highest abrasion & chemical resistance and EXTREMELY high tensile strengths.

Compliance Inspection Services

Compliance Inspection Services Inc. capabilities include fabrication of towers, vessels, tanks, pipe supports, and unique structural components.

Compliance Inspection Services

Compliance Inspection Services Inc Rent Baskets, containers, and AC/Heating Units for the oil and gas, specialty chemical, pharmaceutical and refining industries.

 

16 Ft. DNV/Lloyds Workstations  

Our 16 Ft. steel Workstation is design for multiple uses offshore and on land projects; however,this workstation can be used for many other operations. All of our Workstations can be manufactured Bare Minimum or to meet Classed Certifications. Our structural frames are DNV 2.7.1 certified and Lloyds approved for Class I & II zones. All workstations can be custom build with recessed compartments and storage areas. Click Here to see PDF Floor Plan.


16 ft. DNV/Lloyds Workstations
  • LXWXH: 16'x8'x10'
  • 8'‐10" Ceiling Height
  • DNV 2.7.1/2.7.3
  • Lloyds Class I Div. I & II
  • Pressurization System
  • Gas Detecting System
  • A60 Deck & Bulkhead
  • Tare: 8,500 lbs
  • PayLoad: 8,267 lbs
  • MGW: 16,768 lbs
  • Type Approved Sling Set
  • Water tight double doors


A60 Double Module Door

A60 Double Module Door
A60 Double Module Door


This is an A class door used where customer needs to fit a door in A60 class bulkhead and requires a larger clear opening.

This is an A class door used where customer needs to fit a door in A60 class bulkhead and requires a larger clear opening. Doors are manufactured from 1.5mm double skinned mild steel, finished in red oxide primer. Door frames are manufactured from 4mm mild steel Z section.3 stainless steel lift off hinges. Stainless steel MML mortise latch. Stainless steel lever handles and back plates fitted on live leaf. Slip bolts fitted top and bottom on dead leaf. This door can be manufactured as an internal and external suitable door

Options:
  • Powder painted finish to RAL colour
  • NHN door closer fitted
  • Lockable cylinder c/w 3 keys
  • 300 x 400mm A60 rated vision panel
  • Stainless steel panic bar

Home | Company | Site Map | Contact

Copyright © 2018 Compliance Inspection Services, Inc

Hosting & Design Provided by Jim Pierces Computer Service