COMPLIANCE INSPECTION SERVICES, INC. 1032 Lee Road, Amelia La. 70340


Compliance Inspection Services

Our 16 Ft. steel Workstation is design for multiple uses offshore and on land projects. Our structural frames are DNV 2.7.1 certified and Lloyds approved for Class I & II zones.

Compliance Inspection Services

CISI developed and manufactured pontoons style oil skimmers were on the front line in the Gulf of Mexico during the Gulf Oil spill of 2010

Compliance Inspection Services

We supply an exhaustive variety of specialty coatings which offer the highest abrasion & chemical resistance and EXTREMELY high tensile strengths.

Compliance Inspection Services

Compliance Inspection Services Inc. capabilities include fabrication of towers, vessels, tanks, pipe supports, and unique structural components.

Compliance Inspection Services

Compliance Inspection Services Inc Rent Baskets, containers, and AC/Heating Units for the oil and gas, specialty chemical, pharmaceutical and refining industries.

 

12 Ft. DNV/Lloyds Workstations  

This Workstation is design for multiple uses in the offshore industry; however, this workstation can be used for various projects anywhere in the world. All of our Workstations can be manufactured at a bare minimum or to meet classed certifications. Our structural frames are DNV 2.7.1 certified and Lloyds approved for Class I & II zones. All workstations can be custom build with recessed compartments and storage areas. Click Here to see PDF Floor Plan.


12 ft. DNV/Lloyds Workstations
  • LXWXH 12'x8'x10
  • 8'-10" Ceiling Height
  • DNV 2.7.1/2.7.3
  • Lloyds Class I Div. I & II
  • Pressurization System
  • Gas Detecting System
  • A60 Deck & Bulkhead
  • Tare: 8,500 lbs
  • PayLoad: 8,267 lbs
  • MGW: 16, 768 lbs
  • Type Approved Sling Set
  • 2 Ea. Water tight doors


Walls, Floor and Ceiling meet A-60 Fire Wall Certifications, up to 3" of approved USCG Insulation & Fire Blankets added

A60 Offshore Module Door

A60 Offshore Module Door

Technical Specifications:

Door Rating: A60
Blast Rating: 0.5 Bar
Water Pressure Head: n/a
Door material: 2mm mild steel or AISI 316 stainless steel 2mm thick
Door frame: 4mm mild steel or AISI 316 stainless steel 4mm thick Z frame.
Insulation: 128kg dens superwool 607
Hardware: MML Stainless Steel 3 Point Auto latching arrangement 'A' System Internally with recessed heavy duty handle externally.
Seal: Weatherseal outside with neoprene internally
Hinges: AISI 316 Stainless Steel Hinge and Pin with brass bush.
Door Closer: NHN85 Door Closer
Panic Bar: Optional – AISI 316 Stainless Steel 'B' System Vision Panel 27mm thick Pyrostop glass with Fiber flex insulation tape fitted in stainless steel Pyromat inulated box section frame.
Certification: Lloyds SASF090331



A60 Offshore Module Door

Door manufactured from 1.5mm mild steel 4mm Z section mild steel frame, 3 heavy duty MML lift-off hinges with grease nipple supplied loose, CISI system 'A' internal surface mounted 3 point auto latching arrangement with recessed external lever handle. Door and frame mild finish.

Options

  • Panic bar fitted
  • Lock fitted with panic bar overriding lock
  • Powder painted finish
  • 300 x400mm A60 vision panel


A60 Window

A60 Window

Technical Specification:

Window Rating: A60
Blast Rating: 0.5 Bar
Water Pressure Head: n/a
Frame material: 1.5mm mild steel box section frame. 128kg dens insulation and Monolux 500 board with fibrefax protection tape.
Glass: 27mm Pyrostop glass



A60 Window

A0 & A60 WINDOWS 27 mm thick glass, 80 x 50 mm box section frame for welding into steel bulkhead, 80 x 30 mm box section, to be bolted through high density board, stainless steel cover trim. Window frame fitted with angle for bolting frame to bulkhead.

OPTIONS

  • Bolt in surrounding frame
  • Powder paint frame finish
  • Grey tint glass

Home | Company | Site Map | Contact

Copyright © 2024 Compliance Inspection Services, Inc

Hosting & Design Provided by Jim Pierces Computer Service